Refitting your vessel with our Argos Forward Looking Sonar is relatively straightforward. Approximately 50% of our customer installations are refitted to older hulls. Even some of the New Builds installing Argos sonars have approached integration of our systems as a "refit" when our products have been added to the ship's specifications late in the build process.
When beginning to consider an Argos 3-dimensional forward-looking navigation sonar, the installation design process has been made easy to understand with our Installation Design Guide and Drawing Packages. Here are some highlights.
Available Installation Options
Argos Transducer Modules can be incorporated into a number of different hull shapes from v-bottom to bulbous bows, even hoist options are available. Whether your project has a bulbous bow, a narrow stem, a sailing yacht or an ice breaker, there are installation methods appropriate for your project.
- Fixed Installation
- Means No Moving Parts - Most Argos system designs do not require a hydraulic or electromechanical lift. Such systems requireperiodic maintenance and limit the depth below the keel in which the vessel can operate.
- No Hydraulic/Electromechanical Lift Means Smaller Footprint - In a new build scenario, compromises can be made in the vessel's interior layout to "save" room for the lift machinery that is necessary for other types of sonars. In a refit scenario, this can be difficult and even a deal breaker. The fairing of Argos’ installation design concept is relatively small. In cases where it is inset into the hull, the required space is often available inside an existing tank. Thus little or no redesign of the interior spaces are required.
- Hoist Installation
- Perfect for Ice breakers - Fixed installations are suitable for most ice classed vessels as long as the fairing is installed below the planned ice draft. However, if the vessel is an Ice Breaker, the sonar can be installed on a hoist system allowing it to be retracted when the ship is in active Ice Breaking mode.
- Option for Boats with 10” Sea Chest installing - The Argos 350 is designed to offer the user flexibility. It is a more compact and lighter transducer than the other models and offers two installation techniques. It can be easily mounted on a hoist in a standard 10-inch diameter sea chest or design with the standard fixed installation.
All of our FarSounder drawing review services are gratis. We will make sure the installation design is suitable from an acoustics point of view. This also allows for checking for any simple placement issues that might not be obvious to designers working with forward looking sonar for the first time.
Every refit is slightly different. However, whether you're integrating an Argos sonar into a composite, steel, or aluminum hull, the process is similar. Due to the slight variations in design however, it is simpler to offer review services and assistance rather than offering a standard fairing tube. The fairings are typically mechanically simple making it generally much less expensive to fabricate at the shipyard. Furthermore, since the design is so simple, and all the major underwriters including Lloyds, DNV, and ABS are familiar with our systems, customer drawings can easily be reviewed by the ship's underwriter in very little time.
Installation Design Process
Our Argos Navigation Sonars consist of a Transducer Module, a Power Module, and Computer with SonaSoft™ software. The Transducer Module is generally mounted in a fixed installation fairing while the Power Module is a "black box" mounted somewhere dry out of the way inside the hull.
We have developed a simple fairing design that is adaptable to all types of hulls. The fairing is essentially a tube with an internal mounting flange integrated to the hull. The tube can be integrated internally or kept completely external with only a single cable penetration through the hull. Once the fairing is installed, the Transducer Module itself can be removed and reinstalled underwater by a diver through the use of an underwater wet-mateable connector.
Our engineering department has developed a detailed Installation Design Guide and Drawing Packages to assist customers, shipyards, and naval architects. One thing to know as a general rule is Argos navigation sonars should be installed as far forward and as deep as possible. The deeper the sonar is installed, the better it will perform in higher sea states. We recommend that the Transducer Module be installed at least 1 meter (~3 feet) below the water's surface.
The fairing can be located:
- directly on the centerline through the stem,
- on the centerline but forward of the stem,
- to the side of the stem, just off center, or
- set into the bulb.
Depending upon the hull shape, the rake of the stem, and if the hull has a bulbous bow will determine the optimal location for the unit. There is an Installation Gallery with a variety of pictures of Argos sonars installed on a number of different hull types. Can you guess which ones are refit and which ones are new builds? You might be surprised by the answers.
Our technical team is happy to be as involved with this process as the customer would like. We offer complimentary installation design review and recommend that all customers take advantage of this service before any hull modifications are made. Generally, after reviewing our installation documents, the customer (or customer's naval architect, shipyard, or integrator) will send a draft of the installation based on the design guide and drawing package. Our Engineering Team will provide suggestions for any optimizations. In all cases however, we request a copy of the "final" design be forwarded for review prior to fabrication.
Impact of sonar on hull performance
One looming question often asked is: What is the impact on hull performance from adding this fairing? Argos sonars look large when compared with an echosounder, but it is actually relatively small when compared to the size of the vessels on which they are installed. Though there may be a large perceived impact to the vessel's hydrodynamics, in actuality, it is quite small and not an issue in practice. There have been no reports of vessel performance changes from before to after installation. In fact, hull finishes can have a much bigger impact on the vessel drag coefficient than an Argos sonar.
Adding an Argos sonar to your ship
Once you've decided to add an Argos sonar to your ship, the next step is simple. Contact one of our FarSounder Certified Dealers. They will handle everything from the installation and integration, to the commissioning of the equipment. In addition, they will often work directly with your naval architect and shipyard to make sure that the fairing design process runs smoothly. They are fully trained and understand the systems to assist you from initial questions to post installation service. As always, you can contact us directly for installation design guide and drawing packages.
For more information email firstname.lastname@example.org.